AI Data Governance Framework

AI Data Governance Framework — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Signal transfer function

    Signal transfer function

    The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

    Read more →
  • LIFER/LADDER

    LIFER/LADDER

    LIFER/LADDER was one of the first database natural language processing systems. It was designed as a natural language interface to a database of information about US Navy ships. This system, as described in a paper by Hendrix (1978), used a semantic grammar to parse questions and query a distributed database. It was implemented in Interlisp. The LIFER/LADDER system could only support simple one-table queries or multiple table queries with easy join conditions. Some examples of queries it could accept: What are the length, width, and draft of the Kitty Hawk? When will Reeves achieve readiness rating C2? What is the nearest ship to Naples with a doctor on board? What ships are carrying cargo for the United States? Where are they going? Print the American cruisers’ current positions and states of readiness?

    Read more →
  • Otterly.ai

    Otterly.ai

    Otterly.ai is an Austrian software company, founded in 2024, that provides tools for generative engine optimization, the practice of monitoring and optimizing results in large language models. == History == Otterly.ai was co-founded in 2024 by Thomas Peham, Klaus-M. Schremser and Josef Trauner. The concept for OtterlyAI was developed in response to the increasing use of generative AI tools in digital search and content discovery. The company announced a technology partnership with SEO platform Semrush in January 2025.

    Read more →
  • Geoffrey Hinton

    Geoffrey Hinton

    Geoffrey Everest Hinton (born 6 December 1947) is a British-Canadian computer scientist, cognitive scientist, cognitive psychologist and Nobel Prize laureate known for his work on artificial neural networks, which earned him the title "the Godfather of AI". He is University Professor Emeritus at the University of Toronto. From 2013 to 2023, he divided his time working for Google Brain and the University of Toronto before publicly announcing his departure from Google in May 2023, citing concerns about the many risks of artificial intelligence (AI) technology. In 2017, he co-founded and became the chief scientific advisor of the Vector Institute in Toronto. With David Rumelhart and Ronald J. Williams, Hinton was co-author of a highly cited paper published in 1986 that popularised the backpropagation algorithm for training multi-layer neural networks, although they were not the first to propose the approach. Hinton is viewed as a leading figure in the deep learning community. The image-recognition milestone of the AlexNet designed in collaboration with his students Alex Krizhevsky and Ilya Sutskever for the ImageNet challenge 2012 was a breakthrough in the field of computer vision. Hinton received the 2018 Turing Award, together with Yoshua Bengio and Yann LeCun for their work on deep learning. They are sometimes referred to as the "Godfathers of Deep Learning" and have continued to give public talks together. He was also awarded, along with John Hopfield, the 2024 Nobel Prize in Physics for "foundational discoveries and inventions that enable machine learning with artificial neural networks". In May 2023, Hinton announced his resignation from Google to be able to "freely speak out about the risks of AI". He has voiced concerns about deliberate misuse by malicious actors, technological unemployment, and existential risk from artificial general intelligence. He noted that establishing safety guidelines will require cooperation among those competing in use of AI in order to avoid the worst outcomes. After receiving the Nobel Prize, he called for urgent research into AI safety to figure out how to control AI systems smarter than humans. == Education == Hinton was born on 6 December 1947 in Wimbledon in the United Kingdom and was educated at Clifton College in Bristol. In 1967, he matriculated as an undergraduate student at King's College, Cambridge and, after switching between different fields such as natural sciences, history of art, and philosophy, eventually graduated with a Bachelor of Arts in experimental psychology in 1970. He spent a year apprenticing carpentry before returning to academic studies. From 1972 to 1975, he continued his study at the University of Edinburgh, where he was awarded a PhD in artificial intelligence in 1978 for research supervised by Christopher Longuet-Higgins, who favored the symbolic AI approach over the neural network approach. == Career == After his PhD, Hinton initially worked at the University of Sussex and at the MRC Applied Psychology Unit. After having difficulty getting funding in Britain, he worked in the US at the University of California, San Diego, and Carnegie Mellon University. He was the founding director of the Gatsby Charitable Foundation Computational Neuroscience Unit at University College London. He is currently University Professor Emeritus in the Department of Computer Science at the University of Toronto, where he has been affiliated since 1987. Upon arrival in Canada, Geoffrey Hinton was appointed at the Canadian Institute for Advanced Research (CIFAR) in 1987 as a Fellow in CIFAR's first research program, Artificial Intelligence, Robotics & Society. In 2004, Hinton and collaborators successfully proposed the launch of a new program at CIFAR, "Neural Computation and Adaptive Perception" (NCAP), which today is named "Learning in Machines & Brains". Hinton would go on to lead NCAP for ten years. Among the members of the program are Yoshua Bengio and Yann LeCun, with whom Hinton would go on to win the ACM A.M. Turing Award in 2018. All three Turing winners continue to be members of the CIFAR Learning in Machines & Brains program. Hinton taught a free online course on Neural Networks on the education platform Coursera in 2012. He co-founded DNNresearch Inc. in 2012 with his two graduate students, Alex Krizhevsky and Ilya Sutskever, at the University of Toronto's department of computer science. In March 2013, Google acquired DNNresearch Inc. for $44 million, and Hinton planned to "divide his time between his university research and his work at Google". In May 2023, Hinton publicly announced his resignation from Google. He explained his decision, saying he wanted to "freely speak out about the risks of AI" and added that part of him now regrets his life's work. Notable former PhD students and postdoctoral researchers from his group include Peter Dayan, Sam Roweis, Max Welling, Richard Zemel, Brendan Frey, Radford M. Neal, Yee Whye Teh, Ruslan Salakhutdinov, Ilya Sutskever, Yann LeCun, Alex Graves, Zoubin Ghahramani, and Peter Fitzhugh Brown. == Research == Hinton's research concerns the use of neural networks for machine learning, memory, perception, and symbol processing. He has written or co-written more than 200 peer-reviewed publications. In the 1980s, Hinton was part of the "Parallel Distributed Processing" group at Carnegie Mellon University, which included notable scientists like Terrence Sejnowski, Francis Crick, David Rumelhart, and James McClelland. This group favoured the connectionist approach during the AI winter. Their findings were published in a two-volume set. The connectionist approach adopted by Hinton suggests that capabilities in areas like logic and grammar can be encoded into the parameters of neural networks, and that neural networks can learn them from data. Symbolists on the other side advocated for explicitly programming knowledge and rules into AI systems. In 1985, Hinton co-invented Boltzmann machines with David Ackley and Terry Sejnowski. His other contributions to neural network research include distributed representations, time delay neural network, mixtures of experts, Helmholtz machines and product of experts. An accessible introduction to Geoffrey Hinton's research can be found in his articles in Scientific American in September 1992 and October 1993. In 1995, Hinton and colleagues proposed the wake-sleep algorithm, involving a neural network with separate pathways for recognition and generation, being trained with alternating "wake" and "sleep" phases. In 2007, Hinton coauthored an unsupervised learning paper titled Unsupervised learning of image transformations. In 2008, he developed the visualization method t-SNE with Laurens van der Maaten.While Hinton was a postdoc at UC San Diego, David Rumelhart, Hinton and Ronald J. Williams applied the backpropagation algorithm to multi-layer neural networks. Their experiments showed that such networks can learn useful internal representations of data. In a 2018 interview, Hinton said that "David Rumelhart came up with the basic idea of backpropagation, so it's his invention." Although this work was important in popularising backpropagation, it was not the first to suggest the approach. Reverse-mode automatic differentiation, of which backpropagation is a special case, was proposed by Seppo Linnainmaa in 1970, and Paul Werbos proposed to use it to train neural networks in 1974. In 2017, Hinton co-authored two open-access research papers about capsule neural networks, extending the concept of "capsule" introduced by Hinton in 2011. The architecture aims to better model part-whole relationships within objects in visual data. In 2021, Hinton presented GLOM, a speculative architecture idea also aiming to improve image understanding by modeling part-whole relationships in neural networks. In 2021, Hinton co-authored a widely cited paper proposing a framework for contrastive learning in computer vision. The technique involves pulling together representations of augmented versions of the same image, and pushing apart dissimilar representations. At the 2022 Conference on Neural Information Processing Systems (NeurIPS), Hinton introduced a new learning algorithm for neural networks that he calls the "Forward-Forward" algorithm. The idea is to replace the traditional forward-backwards passes of backpropagation with two forward passes, one with positive (i.e. real) data and the other with negative data that could be generated solely by the network. The Forward-Forward algorithm is well-suited for what Hinton calls "mortal computation", where the knowledge learned is not transferable to other systems and thus dies with the hardware, as can be the case for certain analog computers used for machine learning. == Honours and awards == Hinton is a Fellow of the US Association for the Advancement of Artificial Intelligence (FAAAI) since 1990. He was elected a Fellow of the Royal Society of Canada (FRSC) in 1996, and then a

    Read more →
  • Touch 'n Go eWallet

    Touch 'n Go eWallet

    Touch 'n Go eWallet is a Malaysian digital wallet and online payment platform, established in Kuala Lumpur, Malaysia, in July 2017 as a joint venture between Touch 'n Go and Ant Financial. It allows users to make payments at over 280,000 merchant touch points via QR code, as well as perform peer-to-peer (P2P) money transfers. Since then, the e-wallet further diversified for users to pay for tolls via RFID or PayDirect, street parking and various online payment spanning e-hailing, car-sharing apps or taxis, various overhead bills; top-up for mobile prepaid or in-game currencies; purchases on e-commerce websites; food delivery; renewing motor insurance and other insurance/takaful plans; and even movie, bus, trains or airline tickets. == Background == Prior to the launch of the e-wallet service, Touch 'n Go provided stored-value physical all-in-one contactless card (namely Touch 'n Go cards or "TnG cards") that users can use to pay for toll fares, public transportation and parking lots as well as purchases in some retail stores. In 1999, Touch 'n Go also markets SmartTag devices that allow road users to pass through certain toll booths without the need to unwind the car window. The high entry cost of the device (around RM 100 each) also meant that only few can enjoy the seamless experience. In 2009, Touch 'n Go partnered with Maxis to launch FastTap, a new mobile payment service that utilised Near-Field Communication (NFC). Maxis customers can make payments by placing the phone near the card readers (that also supports physical bank cards and Touch ’N Go cards). However, the venture featured only one phone model, Nokia 6212, which greatly limited the public reach. In July 2012, Touch 'n Go announced another collaboration with CIMB and Maxis to create similar NFC-based online transaction service that runs on compatible smartphones. Touch 'n Go Wallet was launched in February 2017 as an QR code-based e-wallet application, to compete with Samsung Pay that utilizes NFC modules. In the controlled pilot test in Taman Tun Dr Ismail, the correspondents can experience basic functionalities (prepaid mobile service reload, bills payment, movie tickets and flight tickets purchase, transfer of money with another user, and payments at participating stores and restaurants). While the deployed version of the app was generally well-received, the existing process to transfer the balance to the physical TnG card stored value from the app garnered unanimous backlash. Test groups felt that the need to head to a self-service terminal named "Pick Up Device" in person within 24 hours for completion, along with the failure to do so (the balance would be credited back to the wallet after 24 hours), was not divulged clearly and also defeated the purpose of convenience, not to mention there were only 2 such terminals. The feature was eventually suspended. On 15 November 2017, Touch 'n Go was granted permission by the Central Bank of Malaysia to form a joint venture with Ant Financial, a Chinese-based financial company that operates Alipay. The partnership allowed the local e-wallet to learn from and build upon the operational model pioneered by Alipay. In June 2018, it was reported that Touch 'n Go was pilot testing the uses of the Touch 'n Go eWallet in Rapid Transit, as the ticketing system was enabled on the Kelana Jaya line in the Klang Valley. Pilot testing only applied to stations in Kelana Jaya, KL Gateway–Universiti, Kerinchi, KL Sentral, Dang Wangi, KLCC, and Ampang Park. The test was reported to be successful in February 2020 and was planned to be fully deployed on the LRT and MRT. Due to unforeseen circumstances, this feature did not come into fruition, the app merely adds in-app purchase of monthly concession cards called "My50". In August 2018, Touch 'n Go announced that selected drivers may experience first-hand a new RFID-based payment (later rebranded as "myRFID") that serves to replace SmartTag devices on closed toll roads with during pilot testing phase commencing on 3 September 2018. On 2 November 2018, participation in the ongoing pilot programme was expanded, allowing more drivers to sign up ahead of the public rollout of the RFID system. During the same period, Touch 'n Go has discontinued the sales of SmartTAG devices in favor of the RFID-based payment system. Initially, the installation of the RFID chip onto the car could only be done by Touch 'n Go staff at the RFID fitment centers, at no cost. As the pilot testing concluded on 15 February 2020, a self-installation kit are being offered to the public on Lazada and Shopee. Support for taxi-hailing mobile apps was added in November 2018 when Touch 'n Go partnered with EzCab and Public Cab, allowing users to make payments via QR code. This was later expanded to support MULA on 7 January 2020, and later MyCar on 4 April 2020. Touch 'n Go eWallet was also the first eWallet to convert Kuala Lumpur's most famous Ramadan bazaar in Kampong Bahru into "Kampong Kashless", a venue that can accept cashless QR payments. It welcomed more than 250,000 Malaysians including local celebrities and government officials. On 1 October 2019, some e-commerce websites owned by the Alibaba Group (TMall and Taobao) began to support Touch 'n Go eWallet payments, Lazada joined the list on 29 October 2019. Touch 'n Go eWallet was one of the three e-wallet services in Malaysia (the other being Boost and GrabPay) that was eligible for its users to receive an RM 30 credit in conjunction of E-Tunai Rakyat program under the Budget 2020 plan, that further normalizes adoption of cashless and mobile payment among Malaysians. Unlike Boost and GrabPay, whose P2P transfers were completely disabled until users have exhausted the RM 30 first, Touch 'n Go eWallet did not impose such measures. in 2020, Touch 'n Go eWallet joined DuitNow, an electronic transaction ecosystem in Malaysia which allows the funds from Touch 'n Go eWallet to be transferred to other competing services and vice versa, by implementing a standard DuitNow QR code deisgn. Japan become the first country outside Malaysia to support Touch 'n Go eWallet payment via Alipay Connect. During the COVID-19 pandemic and the enforcement of the movement control order, use of eWallets (including Touch 'n Go eWallet) increased tremendously among citizens due to its contactless nature of the payment and increased take-out orders at home; which in turn helped small and medium-sized enterprises to thrive. Touch 'n Go eWallet launched its loyalty programme – The Goal Hunter – in October 2020 where on monthly basis, users collect stamps by paying with the app in exchange for rewards that include lucky draws and other vouchers. == Services == Touch 'n Go eWallet app is available for download on both Google Play and Apple Appstore. It utilizes QR code technology for local in-store payments. The Touch 'n Go eWallet app also diversifies payment types, including but not limited to Utility bills Purchase of motor insurance policy Pay Later facility Prepaid reload and Postpaid payment to telecommunications companies loan repayments for courts, MBSJ payments, zakat and PTPTN payment for car parking P2P transfer airline ticket bookings; movie tickets from TGV Cinemas RFID refuelling at Shell stations (defunct after Shell launched its own payment app in 2024) User can reload the eWallet credit by setting up auto-reload, purchasing reload pins from convenience stores (such as 7-Eleven, KK Super Mart, MyNews, Family Mart etc.), reloading by FPX and credit/debit card. The PayDirect feature allows users to link their physical Touch 'n Go cards into the eWallet, where the toll fare can be debited from the eWallet balance when flashing the card near the sensor. In the circumstance of insufficient balance in the app, the toll fare will be deducted from the physical card's balance instead. This also conveniently allows users to view the card's remaining balance. Touch 'n Go eWallet is the first and only eWallet to offer a money-back guarantee when an unauthorised transaction is made on the user’s eWallet account, subject to Terms & Conditions. Payment via QR code scanning, including Touch 'n Go eWallet, becomes a norm in most of the shops/restaurants across Malaysia, including roadside hawkers/stall owners and automatic vending machines. The merchants usually display their owner's individual QR or Business account that they can apply for in-app. The popularity attributes to the low merchant onboarding cost (Unlike NFC payment and debit/credit card that requires purchase or rental of a payment terminal device at a yearly fee.) The app is also one of the few ewallet that supports bidirectional liquidity (alongside MAE developed by Maybank), where funds can be transferred two-way with bank accounts. This is not possible with the other major ewallets (GrabPay, Boost, ShopeePay etc.) where the money that is reloaded to the wallet cannot be transferred to another bank account, unless through manual req

    Read more →
  • Sentential decision diagram

    Sentential decision diagram

    In artificial intelligence, a sentential decision diagram (SDD) is a type of knowledge representation used in knowledge compilation to represent Boolean functions. SDDs can be viewed as a generalization of the influential ordered binary decision diagram (OBDD) representation, by allowing decisions on multiple variables at once. Like OBDDs, SDDs allow for tractable Boolean operations, while being exponentially more succinct. For this reason, they have become an important representation in knowledge compilation. == Properties == SDDs are defined with respect to a generalization of variable ordering known as a variable tree (vtree). Provided that they satisfy additional properties known as compression and trimming (which are analogous to ROBDDs), SDDs are a canonical representation of Boolean functions; that is, they are unique given a vtree. Like OBDDs, they allow for operations such as conjunction, disjunction and negation to be computed directly on the representation in polynomial time, while being potentially more compact. They also allow for polynomial-time model counting. SDDs are known to be exponentially more succinct than OBDDs. == Applications == SDDs are used as a compilation target for probabilistic logic programs by the ProbLog 2 system since they support tractable (weighted) model counting as well as tractable negation, conjunction and disjunction while being more succinct than BDDs. SDDs have also been extended to model probability distributions, in which context they are known as probabilistic sentential decision diagrams (PSDD).

    Read more →
  • AlphaFold

    AlphaFold

    AlphaFold is an artificial intelligence (AI) program developed by DeepMind, a subsidiary of Alphabet, which performs predictions of protein structure. It is designed using deep learning techniques. AlphaFold 1 (2018) placed first in the overall rankings of the 13th Critical Assessment of Structure Prediction (CASP) in December 2018. It was particularly successful at predicting the most accurate structures for targets rated as most difficult by the competition organizers, where no existing template structures were available from proteins with partially similar sequences. AlphaFold 2 (2020) repeated this placement in the CASP14 competition in November 2020. It achieved a level of accuracy much higher than any other entry. It scored above 90 on CASP's global distance test (GDT) for approximately two-thirds of the proteins, a test measuring the similarity between a computationally predicted structure and the experimentally determined structure, where 100 represents a complete match. The inclusion of metagenomic data has improved the quality of the prediction of multiple sequence alignments. One of the biggest sources of the training data was the custom-built Big Fantastic Database of 65,983,866 protein families, represented as multiple sequence alignments and Hidden Markov models, covering 2,204,359,010 protein sequences from reference databases, metagenomes, and metatranscriptomes. AlphaFold 2's results at CASP14 were described as "astounding" and "transformational". However, some researchers noted that the accuracy was insufficient for a third of its predictions, and that it did not reveal the underlying mechanism or rules of protein folding for the protein folding problem, which remains unsolved. Despite this, the technical achievement was widely recognized. On 15 July 2021, the AlphaFold 2 paper was published in Nature as an advance access publication alongside open source software and a searchable database of species proteomes. As of November 2025, the paper had been cited nearly 43,000 times. AlphaFold 3 was announced on 8 May 2024. It can predict the structure of complexes created by proteins with DNA, RNA, various ligands, and ions. The new prediction method shows a minimum 50% improvement in accuracy for protein interactions with other molecules compared to existing methods. Demis Hassabis and John Jumper shared one half of the 2024 Nobel Prize in Chemistry, awarded "for protein structure prediction," while the other half went to David Baker "for computational protein design." Hassabis and Jumper had previously won the Breakthrough Prize in Life Sciences and the Albert Lasker Award for Basic Medical Research in 2023 for their leadership of the AlphaFold project. == Background == Proteins consist of chains of amino acids which spontaneously fold to form the three dimensional (3-D) structures of the proteins. The 3-D structure is crucial to understanding the biological function of the protein. Protein structures can be determined experimentally through techniques such as X-ray crystallography, cryo-electron microscopy and nuclear magnetic resonance (NMR), which are all expensive and time-consuming. Such efforts, using the experimental methods, have identified the structures of about 170,000 proteins over the last 60 years, while there are over 200 million known proteins across all life forms. Over the years, researchers have applied numerous computational methods to predict the 3D structures of proteins from their amino acid sequences, accuracy of such methods in best possible scenario is close to experimental techniques (NMR) by the use of homology modeling based on molecular evolution. CASP, which was launched in 1994 to challenge the scientific community to produce their best protein structure predictions, found that GDT scores of only about 40 out of 100 can be achieved for the most difficult proteins by 2016. AlphaFold started competing in the 2018 CASP using an artificial intelligence (AI) deep learning technique. == Algorithm == DeepMind is known to have trained the program on over 170,000 protein structures from the Protein Data Bank, a public repository of protein sequences and structures. The program uses a form of attention network, a deep learning technique that focuses on having the AI identify parts of a larger problem, then piece it together to obtain the overall solution. The overall training was conducted on processing power between 100 and 200 GPUs. === AlphaFold 1 (2018) === AlphaFold 1 (2018) was built on work developed by various teams in the 2010s, work that looked at the large databases of related protein sequences now available from many different organisms (most without known 3D structures), to try to find changes at different residues (peptides) that appeared to be correlated, even though the residues were not consecutive in the main chain. Such correlations suggest that the residues may be close to each other physically, even though not close in the sequence, allowing a contact map to be estimated. Building on recent work prior to 2018, AlphaFold 1 extended this by estimating a probability distribution for the distances between residues, effectively transforming the contact map into a distance map. It also used more advanced learning methods than previously to develop the inference. The code was not made publicly available, except to run on sequences of proteins in the 2018 CASP competition. === AlphaFold 2 (2020) === The 2020 version of the program (AlphaFold 2, 2020) is significantly different from the original version that won CASP 13 in 2018, according to the team at DeepMind. AlphaFold 1 used a number of separately trained modules to produce a guide potential, which was then combined with a physics-based energy potential. AlphaFold 2 replaced this with a system of interconnected sub-networks, forming a single, differentiable, end-to-end model based on pattern recognition. This model was trained in an integrated manner. After the neural network's prediction converges, a final refinement step applies local physical constraints using energy minimization based on the AMBER force field. This step only slightly adjusts the predicted structure. A key part of the 2020 system are two modules, believed to be based on a transformer design, which are used to progressively refine a vector of information for each relationship (or "edge" in graph-theory terminology) between an amino acid residue of the protein and another amino acid residue (these relationships are represented by the array shown in green); and between each amino acid position and each different sequences in the input sequence alignment (these relationships are represented by the array shown in red). Internally these refinement transformations contain layers that have the effect of bringing relevant data together and filtering out irrelevant data (the "attention mechanism") for these relationships, in a context-dependent way, learned from training data. These transformations are iterated, the updated information output by one step becoming the input of the next, with the sharpened residue/residue information feeding into the update of the residue/sequence information, and then the improved residue/sequence information feeding into the update of the residue/residue information. As the iteration progresses, according to one report, the "attention algorithm ... mimics the way a person might assemble a jigsaw puzzle: first connecting pieces in small clumps—in this case clusters of amino acids—and then searching for ways to join the clumps in a larger whole." The output of these iterations then informs the final structure prediction module, which also uses transformers, and is itself then iterated. In an example presented by DeepMind, the structure prediction module achieved a correct topology for the target protein on its first iteration, scored as having a GDT_TS of 78, but with a large number (90%) of stereochemical violations – i.e. unphysical bond angles or lengths. With subsequent iterations the number of stereochemical violations fell. By the third iteration the GDT_TS of the prediction was approaching 90, and by the eighth iteration the number of stereochemical violations was approaching zero. The training data was originally restricted to single peptide chains. However, the October 2021 update, named AlphaFold-Multimer, included protein complexes in its training data. DeepMind stated this update succeeded about 70% of the time at accurately predicting protein-protein interactions. === AlphaFold 3 (2024) === Announced on 8 May 2024, AlphaFold 3 was co-developed by Google DeepMind and Isomorphic Labs, both subsidiaries of Alphabet. AlphaFold 3 is not limited to proteins, as it can also predict the structures of protein complexes with DNA, RNA, post-translational modifications and selected ligands and ions. AlphaFold 3 introduces the "Pairformer," a deep learning architecture inspired by the transformer, which is considered similar to, but si

    Read more →
  • Utah Artificial Intelligence Policy Act

    Utah Artificial Intelligence Policy Act

    The Utah Artificial Intelligence Policy Act (SB-149) was signed into law in Utah in 2024 and amended in 2025. The first state law in the United States specifically regulating generative AI, it went into effect on May 1, 2024. The law requires companies to disclose if their customers interact with AI instead of a human. It also established an Office of Artificial Intelligence Policy. Amendments to the Act went into effect on May 7, 2025. While the 2024 Act requires companies to disclose generative AI use when asked by customers, the amendments introduced stricter requirements for higher-risk interactions. SB 226 mandates disclosure of AI use in high-risk interactions involving health, financial, and biometric data, or when providing consumers with advice on financial, legal, or healthcare matters.

    Read more →
  • Eaze

    Eaze

    Eaze is an American company based in San Francisco, California that launched a medical cannabis delivery app of the same name in 2014. == History == Eaze was launched in 2014 by Keith McCarty to deliver medical marijuana to patients in California. McCarty started the company in his San Francisco apartment with four employees. The company provides a mobile app to connect users with cannabis dispensaries, but does not grow or sell marijuana itself, and has been nicknamed “the Uber of Weed”. As of 2017, the company operates in more than 100 cities within California. In 2017, Eaze reported 300 percent growth over the previous year. It has 81 employees, and performs 120,000 deliveries per month to 250,000 users. A survey of Eaze users revealed that 66% are male, 57% are between 22 and 34, just over half have a bachelor's degree, and 49% have an annual income over $75,000. The company's vaporizer cartridge sales reached $1 million in sales in 4 months, and 31% of customers had ordered a vaporizer by the end of 2016. In 2016, Eaze founder Keith McCarty stepped down from his position as CEO and was replaced by Jim Patterson, who served as the company's chief product and technology officer. == EazeMD == EazeMD is a service that helps people acquire a medical marijuana card. It is a California-based telemedicine service in which physicians assess patients through an online video chat. It is California's largest telemedicine service for marijuana referrals. In June 2017, a former employee of one of these physicians accessed patient data in the physician's records system, causing a security breach. However, there was no evidence that Eaze data was accessed. == Eaze Insights == Eaze Insights conducts surveys of their users and compiles data into reports on cannabis use. Statistics from their reports have been cited in Seattle Weekly, Forbes, The Huffington Post, Business Insider, Fortune, and other general interest publications. == Financing == The company announced its $10 million Series A funding in April 2015 by multiple venture capital firms, including the Snoop Dogg-backed Casa Verde Capital. In October 2016, Eaze announced its series B funding in the amount of $13 million from five investors, making the company "the highest-funded startup in the history of the cannabis industry, as well as its fastest-growing one". In September 2017, the company raised another $27 million in venture funding. The Series B funding was led by Bailey Capital, joined by DCM Ventures, Kaya Ventures, and FJ Labs. According to the company' officials in 2017, Eaze managed to raise more than $52 million since its inception in 2014.

    Read more →
  • Guideline execution engine

    Guideline execution engine

    A guideline execution engine is a computer program which can interpret a clinical guideline represented in a computerized format and perform actions towards the user of an electronic medical record. A guideline execution engine needs to communicate with a host clinical information system. Virtual Medical Record (vMR) is one possible interface which can be used. The engine's main function is to manage instances of executed guidelines of individual patients. == Architecture == The following modules are generally needed for any engine: interface to clinical information system new guidelines loading module guideline interpreter module clinical events parser alert/recommendations dispatch == Guideline Interchange Format == The Guideline Interchange Format (GLIF) is a computer representation format for clinical guidelines. Represented guidelines can be executed using a guideline execution engine. The format has several versions as it has been improved. In 2003 GLIF3 was introduced. == Use of third party workflow engine as a guideline execution engine == Some commercial electronic health record systems use a workflow engine to execute clinical guidelines. RetroGuide and HealthFlow are examples of such an approach.

    Read more →
  • Mind map

    Mind map

    A mind map is a diagram used to visually organize information into a hierarchy, showing relationships among pieces of the whole. It is often based on a single concept, drawn as an image in the center of a blank page, to which associated representations of ideas such as images, words and parts of words are added. Major ideas are connected directly to the central concept, and other ideas branch out from those major ideas. Mind maps can also be drawn by hand, either as "notes" during a lecture, meeting or planning session, for example, or as higher quality pictures when more time is available. Mind maps are considered to be a type of spider diagram. == Origin == Although the term "mind map" was first popularized by British popular psychology author and television personality Tony Buzan, the use of diagrams that visually "map" information using branching and radial maps traces back centuries. These pictorial methods record knowledge and model systems, and have a long history in learning, brainstorming, memory, visual thinking, and problem solving by educators, engineers, psychologists, and others. Some of the earliest examples of such graphical records were developed by Porphyry of Tyros, a noted thinker of the 3rd century, as he graphically visualized the concept categories of Aristotle. Philosopher Ramon Llull (1235–1315) also used such techniques. Buzan's specific approach, and the introduction of the term "mind map", started with a 1974 BBC TV series he hosted, called Use Your Head. In this show, and companion book series, Buzan promoted his conception of radial tree, diagramming key words in a colorful, radiant, tree-like structure. == Differences from other visualizations == Concept maps: Mind maps differ from concept maps in that mind maps are based on a radial hierarchy (tree structure) denoting relationships with a central concept, whereas concept maps can be more free-form, based on connections between concepts in more diverse patterns. Also, concept maps typically have text labels on the links between nodes. However, either can be part of a larger personal knowledge base system. Modeling graphs or graphical modeling languages: There is no rigorous right or wrong with mind maps, which rely on the arbitrariness of mnemonic associations to aid people's information organization and memory. In contrast, a modeling graph such as a UML diagram structures elements using a precise standardized iconography to aid the design of systems. == Research == === Effectiveness === Cunningham (2005) conducted a user study in which 80% of the students thought "mindmapping helped them understand concepts and ideas in science". Other studies also report some subjective positive effects of the use of mind maps. Positive opinions on their effectiveness, however, were much more prominent among students of art and design than in students of computer and information technology, with 62.5% vs 34% (respectively) agreeing that they were able to understand concepts better with mind mapping software. Farrand, Hussain, and Hennessy (2002) found that spider diagrams (similar to concept maps) had limited, but significant, impact on memory recall in undergraduate students (a 10% increase over baseline for a 600-word text only) as compared to preferred study methods (a 6% increase over baseline). This improvement was only robust after a week for those in the diagram group and there was a significant decrease in motivation compared to the subjects' preferred methods of note taking. A meta study about concept mapping concluded that concept mapping is more effective than "reading text passages, attending lectures, and participating in class discussions". The same study also concluded that concept mapping is slightly more effective "than other constructive activities such as writing summaries and outlines". However, results were inconsistent, with the authors noting "significant heterogeneity was found in most subsets". In addition, they concluded that low-ability students may benefit more from mind mapping than high-ability students. === Features === Joeran Beel and Stefan Langer conducted a comprehensive analysis of the content of mind maps. They analysed 19,379 mind maps from 11,179 users of the mind mapping applications SciPlore MindMapping (now Docear) and MindMeister. Results include that average users create only a few mind maps (mean=2.7), average mind maps are rather small (31 nodes) with each node containing about three words (median). However, there were exceptions. One user created more than 200 mind maps, the largest mind map consisted of more than 50,000 nodes and the largest node contained ~7,500 words. The study also showed that between different mind mapping applications (Docear vs MindMeister) significant differences exist related to how users create mind maps. === Automatic creation === There have been some attempts to create mind maps automatically. Brucks & Schommer created mind maps automatically from full-text streams. Rothenberger et al. extracted the main story of a text and presented it as mind map. There is also a patent application about automatically creating sub-topics in mind maps. == Tools == Mind-mapping software can be used to organize large amounts of information, combining spatial organization, dynamic hierarchical structuring and node folding.Software packages can extend the concept of mind-mapping by allowing individuals to map more than thoughts and ideas with information on their computers and the Internet, like spreadsheets, documents, Internet sites, images and videos. It has been suggested that mind-mapping can improve learning/study efficiency up to 15% over conventional note-taking. == Gallery == The following dozen examples of mind maps show the range of styles that a mind map may take, from hand-drawn to computer-generated and from mostly text to highly illustrated. Despite their stylistic differences, all of the examples share a tree structure that hierarchically connects sub-topics to a main topic.

    Read more →
  • STUDENT

    STUDENT

    STUDENT is an early artificial intelligence program that solves algebra word problems. It is written in Lisp by Daniel G. Bobrow as his PhD thesis in 1964 (Bobrow 1964). It was designed to read and solve the kind of word problems found in high school algebra books. The program is often cited as an early accomplishment of AI in natural language processing. == Technical description == Within Project MAC at MIT, the STUDENT system was an early example of a question answering software, which uniquely involved natural language processing and symbolic programming. Other early attempts for solving algebra story problems were realized with 1960s hardware and software as well: for example, the Philips, Baseball and Synthex systems. STUDENT accepts an algebra story written in the English language as input, and generates a number as output. This is realized with a layered pipeline that consists of heuristics for pattern transformation. At first, sentences in English are converted into kernel sentences, which each contain a single piece of information. Next, the kernel sentences are converted into mathematical expressions. The knowledge base that supports the transformation contains 52 facts. STUDENT uses a rule-based system with logic inference. The rules are pre-programmed by the software developer and are able to parse natural language. More powerful techniques for natural language processing, such as machine learning, came into use later as hardware grew more capable, and gained popularity over simpler rule-based systems.

    Read more →
  • Sequence labeling

    Sequence labeling

    In machine learning, sequence labeling is a type of pattern recognition task that involves the algorithmic assignment of a categorical label to each member of a sequence of observed values. A common example of a sequence labeling task is part of speech tagging, which seeks to assign a part of speech to each word in an input sentence or document. Sequence labeling can be treated as a set of independent classification tasks, one per member of the sequence. However, accuracy is generally improved by making the optimal label for a given element dependent on the choices of nearby elements, using special algorithms to choose the globally best set of labels for the entire sequence at once. As an example of why finding the globally best label sequence might produce better results than labeling one item at a time, consider the part-of-speech tagging task just described. Frequently, many words are members of multiple parts of speech, and the correct label of such a word can often be deduced from the correct label of the word to the immediate left or right. For example, the word "sets" can be either a noun or verb. In a phrase like "he sets the books down", the word "he" is unambiguously a pronoun, and "the" unambiguously a determiner, and using either of these labels, "sets" can be deduced to be a verb, since nouns very rarely follow pronouns and are less likely to precede determiners than verbs are. But in other cases, only one of the adjacent words is similarly helpful. In "he sets and then knocks over the table", only the word "he" to the left is helpful (cf. "...picks up the sets and then knocks over..."). Conversely, in "... and also sets the table" only the word "the" to the right is helpful (cf. "... and also sets of books were ..."). An algorithm that proceeds from left to right, labeling one word at a time, can only use the tags of left-adjacent words and might fail in the second example above; vice versa for an algorithm that proceeds from right to left. Most sequence labeling algorithms are probabilistic in nature, relying on statistical inference to find the best sequence. The most common statistical models in use for sequence labeling make a Markov assumption, i.e. that the choice of label for a particular word is directly dependent only on the immediately adjacent labels; hence the set of labels forms a Markov chain. This leads naturally to the hidden Markov model (HMM), one of the most common statistical models used for sequence labeling. Other common models in use are the maximum entropy Markov model and conditional random field.

    Read more →
  • Department of Defense Directive 3000.09

    Department of Defense Directive 3000.09

    Department of Defense Directive 3000.09 (DODD 3000.09), titled Autonomy in Weapon Systems, is the current U.S. military policy on autonomous weapons. It states: "Autonomous and semi-autonomous weapon systems will be designed to allow commanders and operators to exercise appropriate levels of human judgment over the use of force." == History == Then-Deputy Secretary of Defense Ashton Carter issued DOD's policy on autonomy in weapons systems, Department of Defense Directive (DODD) 3000.09, in November 2012. DOD updated the directive in January 2023. In February 2023, the US issued a related foreign policy proposal, Political Declaration on Responsible Military Use of Artificial Intelligence and Autonomy. == Definitions == There is no agreed definition of lethal autonomous weapon systems that is used in international fora. However, DODD 3000.09 provides definitions for different categories of autonomous weapon systems for the purposes of the U.S. military. These definitions are principally grounded in the role of the human operator with regard to target selection and engagement decisions, rather than in the technological sophistication of the weapon system. DODD 3000.09 defines LAWS as "weapon system[s] that, once activated, can select and engage targets without further intervention by a human operator." This concept of autonomy is also known as "human out of the loop" or "full autonomy." The directive contrasts LAWS with human-supervised, or "human on the loop," autonomous weapon systems, in which operators have the ability to monitor and halt a weapon's target engagement. Another category is semi-autonomous, or "human in the loop," weapon systems that "only engage individual targets or specific target groups that have been selected by a human operator." Semi-autonomous weapons include so-called "fire and forget" weapons, such as certain types of guided missiles, that deliver effects to human-identified targets using autonomous functions. The directive does not apply to autonomous or semi-autonomous cyberspace capabilities; unarmed platforms; unguided munitions; munitions manually guided by the operator (e.g., laser- or wire-guided munitions); mines; unexploded explosive ordnance; or autonomous or semi-autonomous systems that are not weapon systems, nor subject them to its guidelines. == Role of human operator == DODD 3000.09 requires that all systems, including LAWS, be designed to "allow commanders and operators to exercise appropriate levels of human judgment over the use of force." As noted in an August 2018 U.S. government white paper, "'appropriate' is a flexible term that reflects the fact that there is not a fixed, one-size-fits-all level of human judgment that should be applied to every context. What is 'appropriate' can differ across weapon systems, domains of warfare, types of warfare, operational contexts, and even across different functions in a weapon system." Furthermore, "human judgment over the use of force" does not require manual human "control" of the weapon system, as is often reported, but rather broader human involvement in decisions about how, when, where, and why the weapon will be employed. This includes a human determination that the weapon will be used "with appropriate care and in accordance with the law of war, applicable treaties, weapon system safety rules, and applicable rules of engagement." To aid this determination, DODD 3000.09 requires that "[a]dequate training, [tactics, techniques, and procedures], and doctrine are available, periodically reviewed, and used by system operators and commanders to understand the functioning, capabilities, and limitations of the system's autonomy in realistic operational conditions." The directive also requires that the weapon's human-machine interface be "readily understandable to trained operators" so they can make informed decisions regarding the weapon's use. == Weapons review process == DODD 3000.09 requires that the software and hardware of covered semi-autonomous and autonomous weapon systems, be tested and evaluated to ensure they:Function as anticipated in realistic operational environments against adaptive adversaries taking realistic and practicable countermeasures, [and] complete engagements within a timeframe and geographic area, as well as other relevant environmental and operational constraints, consistent with commander and operator intentions. If unable to do so, the systems will terminate the engagement or obtain additional operator input before continuing the engagement.Systems must also be "sufficiently robust to minimize the probability and consequences of failures." Any changes to the system's operating state—for example, due to machine learning—would require the system to go through testing and evaluation again to ensure that it has retained its safety features and ability to operate as intended. The directive also notes that "the use of AI capabilities in autonomous or semi-autonomous systems will be consistent with the DOD AI Ethical Principles." In addition to the standard weapons review process, a secondary senior-level review is required for covered autonomous and semi-autonomous systems. This review requires the Under Secretary of Defense for Policy (USD[P]), the vice chairman of the Joint Chiefs of Staff (VCJCS), and the Under Secretary of Defense for Research and Engineering (USD[R&E]) to approve the system before formal development. USD(P), VCJCS, and the Under Secretary of Defense for Acquisition and Sustainment (USD[A&S]) must then approve the system before fielding. In the event of "urgent military need," this senior-level review may be waived by the Deputy Secretary of Defense. DODD 3000.09 additionally establishes the Autonomous Weapon System Working Group—composed of representatives of USD(P); USD(R&E); USD(A&S); DOD General Counsel; the Chief Digital and AI Officer; the Director, Operational Test and Evaluation; and the chairman of the Joint Chiefs of Staff—to support and advise the senior-level review process. == Congressional notification == Per Section 251 of the FY2024 National Defense Authorization Act (NDAA; Pub. L. 118–31 (text) (PDF)), the Secretary of Defense is to notify the defense committees of any changes to DODD 3000.09 within 30 days. The Secretary is directed to provide a description of the modification and an explanation of the reasons for the modification. Section 1066 of the FY2025 NDAA (Pub. L. 118–159 (text) (PDF)) additionally requires the Secretary to "submit to the congressional defense committees a comprehensive report on the approval and deployment of lethal autonomous weapon systems by the United States," annually through December 31, 2029. Section 1061 of the FY2026 NDAA (P.L. Pub. L. 119–60 (menu; GPO has not yet published law)) amends the U.S. Code to require congressional notification of any waiver issued under DODD 3000.09. == AI safety == The second revision of DoDD 3000.09, effective January 25, 2023, requires that "The DoD will design and engineer AI capabilities to fulfill their intended functions while possessing the ability to detect and avoid unintended consequences, and the ability to disengage or deactivate deployed systems that demonstrate unintended behavior." == Criticism == As noted in the Bulletin of the Atomic Scientists, the policy requires that autonomous weapon systems that kill people or use kinetic force, selecting and engaging targets without further human intervention, be certified as compliant with "appropriate levels" and other standards, not that such weapon systems cannot meet these standards and are therefore forbidden. "Semi-autonomous" hunter-killers that autonomously identify and attack targets do not require certification.

    Read more →
  • Open Knowledge Base Connectivity

    Open Knowledge Base Connectivity

    Open Knowledge Base Connectivity (OKBC) is a protocol and an API for accessing knowledge in knowledge representation systems such as ontology repositories and object–relational databases. It is somewhat complementary to the Knowledge Interchange Format that serves as a general representation language for knowledge. It is developed by SRI International's Artificial Intelligence Center for DARPA's High Performance Knowledge Base program (HPKB).

    Read more →